If you have a concrete slab, floor, or wall that you need to cut, you need to make sure that you have the right equipment and knowledge before you try to cut through the concrete. When it comes to cutting through concrete, you need to be careful and safe in order to get the best results.
Tip #1: Make Sure You Have the Right Saw
First, you need to make sure that you have the right saw for the job. There is more than one type of concrete saws that you can use to cut through concrete. For example, if you have a big job on the floor, use a walk-behind saw. These are really heavy pieces of equipment, which are able to make really straight and deep cuts. Walk-behind saws are always wet saws, which means you need to use water with them in order to keep the blade cool and cut down on dust.
Your other option is a hand-held saw, which works better for cutting concrete on walls and hard to reach places. With a hand-held saw, you are more than likely going to have to make repeated cuts with the saw. Hand-held saws can be both wet or dry, with the type you use really depending on what you prefer.
Tip #2: Make Sure You Have the Right Blade
Second, you need to make sure you have the right blade. The best type of blade is a diamond blade. With a diamond blade, you can see exposed crystals on the blade. As you work with a diamond blade, as the exposed crystals become dull, they fall off the blade, exposing new ones underneath. Diamond blades allow you to get the most cutting done with a single blade and are really strong.
Tip #3: Have a Plan for the Dust
When you are cutting through concrete, a great deal of dust is going to be created. You need to have a plan for dealing with the dust. With a wet saw, the water you use will help to keep the dust down. If you are using a dry saw, you are going to want to have a dust extractor in place to quickly remove the dust from the air.
You also need to make sure you also have a plan to protect yourself from the dust. You should be using a construction grade respirator that will filter out and keep the dust particles from getting into your lungs. You don't want to be breathing in concrete dust.
Tip #4: Mark Out Your Cut
Finally, before making a cut, you should mark out your cut. You can mark your cut with chalk if you are using a dry saw. If you are using a wet saw, you should use a crayon, as the chalk will just wash away. To make your cut even more smooth, use a guide board. A guide board alongside the marked cutting line will help keep you on track.
Cutting through concrete is a skilled job, which is why it may be best to outsource this part of your project. Consider working with services like A & B Concrete Coring Company if you need additional help.
Share
